Install and Use Proteus Professional
Updated
•2 min read
H
I'm a Multan, Pakistan based Mechanical Engineer. I push pixels, shuffle data, and slap my keyboard until everything works.
1. Download Proteus Professional Demo from Website
1.1 Open Url https://www.labcenter.com/downloads/
 |
| Fig.1 - Proteus Download Page |
1.2 Click download
Enter your email and the download link will be sent to your email address and will expire in 2 hours.
 |
| Fig.2 - Proteus Download Link |
2. Download and run the setup
2.1 Visual C++ Installer will start before Proteus Setup
Install All 3 Packages.
| VC++ 2008 | VC++ 2010 | VC++ 2013 |
 |  |  |
2.2 Install Proteus with Default Settings
 |
| Fig.3 - Proteus Setup |
3. Open Proteus Professional
3.1 Right Click and Run as Administrator Proteus Icon Present on Desktop
 |
| Fig.4 - Run as Administrator |
3.2 Proteus Home Page
 |
| Fig.5 - Proteus Home Page |
3.3 Create New Project and Select Default Settings
 |
| Fig.6 - Default Schematic Window |
3.4 Menu Bar
You create/save/load/print etc the project from the menu bar
 |
| Fig.7 - Menu Bar |
3.5 Simulation Controls
You can start stop and pause the simulation from here
 |
| Fig.8 - Simulation Controls |
3.6 Modes
You can change to select/component/instrument mode etc from here
 |
| Fig.9 - Modes |
3.7 Device Manager
Click P in Component Mode or Press P on Keyboard to open Device Manager. Here you can see and select the device/components installed for use. Search and double click LED and Cell to use
 |  |
| Fig.10 - LED | Fig.11 - Cell |
3.8 Selected Component will be present in Devices list on the left
 |
| Fig.12 - Devices List |
3.9 Drag and Drop components schematic view and connect the terminals
 |
| Fig.13 - Simulation Schematic |
3.10 Double click the cell and change the voltage to 3V
 |
| Fig.14 - Components Properties |
3.11 Clcik start simulation Button and LED will start Glowing
 |
| Fig.15 - Simulation |
41 views
